Best Shops In Milwaukee

[DBeck]

Ok, so here is the question...

What are the best shops in and near Milwaukee... for LS1s that is...


oh and I know "Best" can also be a personal opinion, but I just wanna see what you guys think is the best


thanks
Ry

[Heat Seeker WS6]

Speed Inc- www.LS1speed.com
Finishline Performance- www.flp2win.com

[DBeck]

why?

[Heat Seeker WS6]

I know alot of people that have taken thier cars to those places and have had very few complaints. Most of us here know Jim Moran from Speed Inc- he does fantastic work.

[SlowStee]

why?
speed INC is the classic answer for anything with 4th gen f-bodies, LS1s especially.



Every guy with an F-body should know that Speed Inc is top notch, they know their **** and are the midwest specialists :thumbsup

[PHDcamaro]

my friend chris had work done on his Formula down there.... he said they do great work

[Crawlin]

I had my **** done down there for the most part

Brad/UnderPSI had his **** done down there.

Although, the tunes are good, they'll leave something to be desired if you want to get ALL the way to the edge. They understandably have to have some sort of safety to their tunes.

[theavenger333]

tuning, go to Tom B motorsports?

[Holeshot]

The guy that owns ls1gto.com works for Speed Inc. His name is Jon
Also Larry is one of the best tuners I have seen. Speed Inc Is the best around.

[DBeck]

sweet

[UnderPSI]

Speed Inc. is where it's at! Nothing but good things to say about them. :thumbsup

[Baddriver01]

Speed Inc not only has great guys but they also offer great advice and starter tips for us newbie LS1 owners. Not only did they help me with the install of my ZO6 stuff but also dyno tuned the car perfectly. Honestly, it was the best money I ever spent. The car runs perfectly every time and it's generously modded.

Hell, you can't beat free shipping on most orders also. Headers, y-pipe and catback all delivered to my door...that poor FEDEX guy...I've got some places NOT to go, if interested I can PM you.

Of course, Speed Inc is in Schaumberg, IL so it's not exactly Milwaukee but worth the trip.

[MoreTorque]

I have been a Speed Inc. customer for over 5 years now and have never been let down. They know their stuff and are always willing to help.

[GTSLOW]

speed INC is the classic answer for anything with 4th gen f-bodies, LS1s especially.



Every guy with an F-body should know that Speed Inc is top notch, they know their **** and are the midwest specialists :thumbsup

There's guys here in caly get stuff done by speed inc :wooo

I've bought a few things thru them and the items have always been a great deal and came early!

[BAD LS1]

what are you looking to get done? i do just about 90% of most things with f-bodies..

[jbiscuit]

Big 3 Performance?

[HAMRHEAD]

Talk to Tom at speed inc. Shoot him an e-mail and he will respond faster than anyone I've ever dealt with. The best customer service around and will pricematch anything.

[GTSLOW]

what are you looking to get done? i do just about 90% of most things with f-bodies..

Cam swap in caly? Let's set a date :thumbsup

[DirtyMax]

Big 3 Performance?


Word Up!! Big 3 has been well regarded and endorsed by members of this website... :goof

[MurphysLaw88GT]

^^^^^^^^^^^^^^haha

[GTSLOW]

Word Up!! Big 3 has been well regarded and endorsed by members of this website... :goof

:thumbsup x1000000000000

They have well experienced technicians too.

[SlowStee]

Ls1 guys got it good around here...


you can either chose a shop...or Tom :goof

[SLOWC5]

come over to hartland, tom and I can take care of you

JEFF

[junk mx6 no rly]

srry to highjack your post but since this is kind of the topic anyone know where i can get my t3 flan ge weld to my castiron manifold?

[Crawlin]

OTE Design & Fabrication

www.otedesign.com

ask for Tom

(seems all the good car peeps are named Tom around here)

[HAMRHEAD]

I think if I ever open a performance supply store I'm gonna change my name to Tom
Apparently it works for them!

[nitrorocket]

I also do LS1 work also. If you've seen my car, I have a pretty wild twin turbo LS1. P.m. me for any tech questions you might ever have, I can give you legit answers without trying to sell you something.

Good luck!

[HAMRHEAD]

I also do LS1 work also. If you've seen my car, I have a pretty wild twin turbo LS1. P.m. me for any tech questions you might ever have.

Good luck!
I see your using a t400, mind if I ask what gears you went with in your 12 bolt and what size tire you use, 28" 26"?

[nitrorocket]

I run a 3.42 gear and a 26" tire.:)

[nitrorocket]

What do you want to do with the car???

[Crawlin]

i agree with the above... that man's setup is pretty impresive

[nitrorocket]

For the person who asked how 750 RWHP (Approx. 940 hp @ crank) turned into 1000 hp at the crank..... I made that at only 14 psi, I run 16 psi and have upgraded turbos. The car now makes over 1000 hp at the crank.:)

What is with the comment?:chair:

[BAD LS1]

I actually own a F-body, and have been wrenching on them for over 5 years now, i know the car's and their drivetrain inside and out. I can do rear end work, manual trans rebuilds (T56), TC swaps, suspension, electrical, internal engine, exhaust....

There are alot of people i helped out on the board that i have done work for that im sure would be willing to back my reputation.

[Poncho]

Bad Ls1 = my hero.

[JR HAWK 9]

I actually own a F-body, and have been wrenching on them for over 5 years now, i know the car's and their drivetrain inside and out. I can do rear end work, manual trans rebuilds (T56), TC swaps, suspension, electrical, internal engine, exhaust....

There are alot of people i helped out on the board that i have done work for that im sure would be willing to back my reputation.

yep, Tom's (BAD LS1) a GREAT guy!! Those who know me know how picky I am about my car. If I ever decide to swap a different cam in, I will be contacting Tom for sure. He installed my gears a couple months ago and I love 'em :)

Paul

[ProjectCamaro]

I actually own a F-body, and have been wrenching on them for over 5 years now, i know the car's and their drivetrain inside and out. I can do rear end work, manual trans rebuilds (T56), TC swaps, suspension, electrical, internal engine, exhaust....

There are alot of people i helped out on the board that i have done work for that im sure would be willing to back my reputation.

Since I'm having so much trouble getting my header's and such to seal up how much do you charge to do a header swap? I've done it myself but I just don't have the time.

[ricksws7]

Badls1 is a great tuner you can trust. Did my car tune and I am planning a rear end gear change for him to do. You can trust him to do good work. Rick:headbang