Heat Seeker WS6
06-04-2006, 05:27 PM
I have an Alpine MRV-F450 5 channel amp still in the box & never hooked up. I got it from kartunes and have the origional purchase receipt.
Was going to have it drive the fronts, rears and a 10" sub, but decided not to.
Specs:
50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 at 2 ohms + 200 watts RMS x 1 at 4 ohms
120 watts RMS x 2 + 200 watts RMS x 1 in bridged mode
2-, 3-, 4-, or 5-channel output
Tri-Way capable
requires 8-gauge power and ground leads wiring and hardware not included with amplifier
Bass Engine features:
front and rear channels have variable 50-200 Hz high-pass/low-pass crossovers, 12 dB/octave
sub channel has a 30-200 Hz low-pass crossover, 12 dB/octave
selectable (15 Hz or 30 Hz) subsonic filter on the sub channel
tuned Bass EQ (6 dB bass boost at 50 Hz with adjustable Q factor, while frequencies below 30 Hz are cut by 6 dB) on the sub channel
MOSFET power supply
STAR Topology (minimizes internal noise and prevents ground interference)
oversized power and ground connections
gold-plated screw terminals
top-mounted controls with cover
detachable front cover
blue power LED
16-9/16"W x 2-1/2"H x 11-1/4"D (depth is 10" with front cover removed)
http://www.cbrstereo.com/ProductImages/MRVF450.jpg
make an offer....
john
Was going to have it drive the fronts, rears and a 10" sub, but decided not to.
Specs:
50 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 at 2 ohms + 200 watts RMS x 1 at 4 ohms
120 watts RMS x 2 + 200 watts RMS x 1 in bridged mode
2-, 3-, 4-, or 5-channel output
Tri-Way capable
requires 8-gauge power and ground leads wiring and hardware not included with amplifier
Bass Engine features:
front and rear channels have variable 50-200 Hz high-pass/low-pass crossovers, 12 dB/octave
sub channel has a 30-200 Hz low-pass crossover, 12 dB/octave
selectable (15 Hz or 30 Hz) subsonic filter on the sub channel
tuned Bass EQ (6 dB bass boost at 50 Hz with adjustable Q factor, while frequencies below 30 Hz are cut by 6 dB) on the sub channel
MOSFET power supply
STAR Topology (minimizes internal noise and prevents ground interference)
oversized power and ground connections
gold-plated screw terminals
top-mounted controls with cover
detachable front cover
blue power LED
16-9/16"W x 2-1/2"H x 11-1/4"D (depth is 10" with front cover removed)
http://www.cbrstereo.com/ProductImages/MRVF450.jpg
make an offer....
john