Need a shop, dont know where to turn

[SlowStee]

I need my X-pipe setup fixed up a bit, Passenger side needs to be put on the header better, turn-downs need to be either welded on or expanded to fit on the mufflers, and I need it hung. Its suuuper super low to the ground right now.



Im in a jam here, Dennis at midas has been out on injury and no one else there will touch my car, and Fasttimes keeps telling me to call back the next day because they are too busy.


Any suggestions? Im scared to drive it real far, so someplace close would be nice. I wanna get this **** done!

[Crawlin]

OTE tom in Waukesha will get it done quick I'm assuming. He's done a couple true duals on f-bodies.

If you call Mike at Fast Times and tell him Chris with the black Z sent ya, let him know you are on the BCM board as well. He is MT98Z on this board

[PHDcamaro]

try KieperRacing in The Falls
www.KieperRacing.com

get the number off there... idk it off hand

[UnderPSI]

Big Three Performance in waukesha. They are experts at everything.

[SlowStee]

Big Three Performance in waukesha. They are experts at everything.
someone actually told me to go there the other night on hwy :D I wont mention his name

[SlowStee]

OTE tom in Waukesha will get it done quick I'm assuming. He's done a couple true duals on f-bodies.

If you call Mike at Fast Times and tell him Chris with the black Z sent ya, let him know you are on the BCM board as well. He is MT98Z on this board
Tom is swamped until the beginning of may....DAMNIT


more suggestions guys????

[UnderPSI]

Skeeter's shop www.skeeter57.com <-----I think that is right.

[TransAm12sec]

Car Maid
262 377 2140
W63N680 Washington Ave
Cedarburg, WI 53012

Dennis has worked on my Dad's cars for at least 16 years. He also installed my exhaust.

[Yooformula]

Im in a jam here, Dennis at midas has been out on injury and no one else there will touch my car, and Fasttimes keeps telling me to call back the next day because they are too busy.


Ask for Paul at the same Midas and tell him you are a friend of mine.

[Nix]

Mufflers and Pipes on sunset drive in Waukesha, they will do it and they do very excellent work. :thumbsup Give them a jingle and see what they say.

[juicedimpss]

lincoln muffler and brake.
543-0366

[SlowStee]

Ask for Paul at the same Midas and tell him you are a friend of mine.
if its the guy who does "custom exhaust" and is dennis's "guy for custom stuff" than no way...as soon as he found out I have no cats, he said he couldnt help me.




My cars at Kilpatricks right now.

[SlowStee]

holy ****!!!!!.....this is costing me :(

[Crawlin]

HA,

if you could have waited, i could have welded up in my new garage ;)

my true dual exhaust was $500 and some change, and that didn't even go over the axle

[SlowStee]

HA,

if you could have waited, i could have welded up in my new garage ;)

my true dual exhaust was $500 and some change, and that didn't even go over the axle
Kilpatricks is charging me $400!!


it dumps off before the rear differential too...they pulled it all off and powdercoated it black and a bunch of other ****, he said it looks great.



say somethin to make me feel better :(

[Crawlin]

it's gonna sound SWEEEEEEEEEEEEEEEEEEEEET and get you more HP

[SlowStee]

it's gonna sound SWEEEEEEEEEEEEEEEEEEEEET and get you more HP
:rolf...I drove it there together, it sounds REAL nice..


I went with 16" dynomax bullets

[Crawlin]

yack, i just can't stand the dynomax bullets, but they do sound hairy, i'll give them that :) once you put that came in there, you might be looking for some new ones, hah

[SlowStee]

Despite the amount of $$$ I paid :( , Kilpatricks did a really good job :thumbsup

[theavenger333]

gotta have patience dude......

[SlowStee]

gotta have patience dude......
whats that have to do with anything? The car sat for weeks while I was stuck without a car..

[97PontiacW68]

that sucks post some sound clips of the new setup when u can

[97z2801ss]

good deal julio I wanna hear it soon

[purpl72olds]

Sounded pretty damn good for an LT1 car, Stopped in and looked at it last week.

[SlowStee]

Sounded pretty damn good for an LT1 car, Stopped in and looked at it last week.
they did a really nice Job :thumbsup

[Scales]

Mufflers and Pipes on sunset drive in Waukesha, they will do it and they do very excellent work. :thumbsup Give them a jingle and see what they say.

:rolf

They BUTCHERED the exhaust on my last Camaro. Took it there for a simple 3" Flowmaster install and it looked like they bent the pipe over someone's knee before they installed it!! It was pretty cheap though so I guess you get what you pay for!

On that note, I also need some exhaust work done too. I need about a 2" section removed from the Y-pipe and re-welded and re-hung. My $hit hangs WAY too low!! Anyone want to take on a side job?

[u_say_go]

check out OTE, Scales. They're doing the exhaust on pop's 32', fairly reasonable too. Give em a call. Did you take your car in for an estimate yet?

[Nickerz]

not to sidetrack this convo, but what's the deal with big 3? I saw the place in waukesha a while ago and was thinking wtf? There's no fast rides EVER sitting around there, and their website sucks my nuts. Is that an actual business? I saw one dude that worked there driving a neon with altezzas for christ sake!

[UnderPSI]

Funny thing, Forrest from Big Three called me today at 8:30pm and says, "I remember talking to you earlier about having blown your motor. Keep us in mind for building your new one." Yea......... Keep in mind a class of third graders could build a better motor out of popsicle sticks. I just said "yea, ok" and hung up. Then I realized it was 8:30 at night. Who knows what Forrest is ASE certified in, we all know it isn't common sense. :rolf

[theavenger333]

whats that have to do with anything? The car sat for weeks while I was stuck without a car..
there were quite a few more suggestions after you went and got it done at kilpatricks, thats all. it seems having exhaust fabbed can be a life or death thing, i needed a custom job done on a car once, nobody would touch it for under 200 bucks. a month later i met a guy who woulda welded it up for 50. i'm also quite suprised a few of those places said they wouldn't even look at it, especially dennis' midas..... guess you got fooked, on the account of being AC Slater? :headbang

[Yooformula]

there were quite a few more suggestions after you went and got it done at kilpatricks, thats all. it seems having exhaust fabbed can be a life or death thing, i needed a custom job done on a car once, nobody would touch it for under 200 bucks. a month later i met a guy who woulda welded it up for 50. i'm also quite suprised a few of those places said they wouldn't even look at it, especially dennis' midas..... guess you got fooked, on the account of being AC Slater? :headbang

Dennis was out on disability. He is back now but the guy running(Paul) the place probably didnt know him.

[SlowStee]

there were quite a few more suggestions after you went and got it done at kilpatricks, thats all. it seems having exhaust fabbed can be a life or death thing, i needed a custom job done on a car once, nobody would touch it for under 200 bucks. a month later i met a guy who woulda welded it up for 50. i'm also quite suprised a few of those places said they wouldn't even look at it, especially dennis' midas..... guess you got fooked, on the account of being AC Slater? :headbang
Its reeeealllly hard to go to school and work everyday without my daily driver

[DBeck]

dont go to GM Goodwrench on hwy 100....they are terrible at doing anything

[Beagle]

mufflers and pipes is usually cheap.

[sidewayzbimmer]

holy old thread!

[UnderPSI]

Yea it is, Why do you keep digging up all the old threads????? :chair: