team ducktape
12-10-2005, 08:13 PM
*A/C compressors (3) with a good condition front vr-4 condenser; have a talon and vr-4 compressor mounts that come with. Also have barley used lines. All or nothing. $50
*2g head complete ready to go on motor. All stock $150. Good low miles.
*Brand new 880cc PTE injectors. Comes in bag they came with never been out of wrap. Flow charts come with from factory. $280 Brand new.
* Turbotrix sheet metal intake needs to be cleaned up $250 used. Flanged for mustang TB
* Spearco Air to liquid intercooler made to flow over 1400 cfm’s. 2.5 in and out let. Paid over $1000. Has not even 5000 miles on it. $650
* Brackets to fit bigger calipers and rotors on a Talon/Galant vr-4. Calipers from 3000 gt-vr4, stealth, ect. are able to be bolted on. New that's what I paid for them. $75.
* JDM double board ECU and wiring harness. $100
* HKS cam gears brand new in box. $280
* Fuel pressure regulator. -6an return and feeds. Almost new $100
* GT 42r Dual ball bearing turbo:
-Specs are 102mm compressor (1000whp) 5" inlet with anti surge cover, 82mm turbine, 1.01 A/R T4 divided exhaust inlet, 4" V-band exhaust outlet.
This has never been used, just removed from plastic and placed next to things for reference and measurements. $1700 list for over $2600.
* HKS manifold need I say more; only mounted never ran comes with large HKS wastegate and WRC turbo. The turbo is a T4. It has a divided entry .58 A/R exhaust housing, and a .70 A/R compressor housing, and was built by TEC specifically for Vermont Sportscar.
$2000
* Large Paxton fuel pump 100hp, 20 ft. -10 an ss line, brand new 15 gallon aluminum fuel cell with sending unit also has foam inside, also a log style ss fuel filter all for $400
* Built lower end. Short block 4g63 turbo. Has J & E pistons .20 over, ARP head studs, balanced, ect, ect. About 5000 miles on it. $800
*BJ’s sheet metal intake with brand new mustang TB $400
*more to come
Also have a race galant vr-4 on ebay.
*2g head complete ready to go on motor. All stock $150. Good low miles.
*Brand new 880cc PTE injectors. Comes in bag they came with never been out of wrap. Flow charts come with from factory. $280 Brand new.
* Turbotrix sheet metal intake needs to be cleaned up $250 used. Flanged for mustang TB
* Spearco Air to liquid intercooler made to flow over 1400 cfm’s. 2.5 in and out let. Paid over $1000. Has not even 5000 miles on it. $650
* Brackets to fit bigger calipers and rotors on a Talon/Galant vr-4. Calipers from 3000 gt-vr4, stealth, ect. are able to be bolted on. New that's what I paid for them. $75.
* JDM double board ECU and wiring harness. $100
* HKS cam gears brand new in box. $280
* Fuel pressure regulator. -6an return and feeds. Almost new $100
* GT 42r Dual ball bearing turbo:
-Specs are 102mm compressor (1000whp) 5" inlet with anti surge cover, 82mm turbine, 1.01 A/R T4 divided exhaust inlet, 4" V-band exhaust outlet.
This has never been used, just removed from plastic and placed next to things for reference and measurements. $1700 list for over $2600.
* HKS manifold need I say more; only mounted never ran comes with large HKS wastegate and WRC turbo. The turbo is a T4. It has a divided entry .58 A/R exhaust housing, and a .70 A/R compressor housing, and was built by TEC specifically for Vermont Sportscar.
$2000
* Large Paxton fuel pump 100hp, 20 ft. -10 an ss line, brand new 15 gallon aluminum fuel cell with sending unit also has foam inside, also a log style ss fuel filter all for $400
* Built lower end. Short block 4g63 turbo. Has J & E pistons .20 over, ARP head studs, balanced, ect, ect. About 5000 miles on it. $800
*BJ’s sheet metal intake with brand new mustang TB $400
*more to come
Also have a race galant vr-4 on ebay.